Space
Chandrayaan‑3’s Vikram Lander Reveals Three‑Layered Lunar Soil Profile

Bengaluru – Data from Chandrayaan‑3’s Vikram lander show that the Moon’s surface is not a uniform blanket of dust and broken rock. Analysis of the Chandra’s Surface Thermophysical Experiment (ChaSTE) data, published in the Nature Portfolio journal npj Space Exploration, identified three distinct layers within the top 10 cm of lunar soil at Shiv Shakti Point. The study, led by K. Durga Prasad of the Physical Research Laboratory (PRL) in Ahmedabad, found a highly porous upper layer extending to about 3 cm, a middle layer between 3 and 6 cm with higher thermal conductivity, and a denser bottom layer between 6 and 10 cm with intermediate thermal conductivity. The researchers noted that the regolith is not uniform even within the top 10 cm, exhibiting different geotechnical and thermophysical properties at different depths – a fine‑scale layering that had not been observed or expected earlier.
The discovery builds on earlier work published in April, which analyzed ChaSTE measurements after Vikram’s historic hop manoeuvre. The lander’s engine firing disturbed the uppermost 2–3 cm of soil at the new location, exposing underlying layers and revealing a two‑layer structure. The new analysis of measurements from the original, pre‑hop location now shows the complete three‑layer profile, including the extremely porous surface layer.
The uppermost soil has an estimated porosity of about 80 % and a bulk density of around 600 kg m⁻³. Its density rises to roughly 1,500 kg m⁻³ at 10 cm depth. Soil cohesion also increases with depth, reaching about 1,350 Pa at 10 cm, significantly higher than estimates from earlier lunar missions.
The findings provide the first direct thermophysical profiling of the Moon’s southern high‑latitude region. A temperature gradient of about 73 K across the top 10 cm at local noon was observed, with the three layers responding differently to solar heating. The researchers suggest that successive impact events involving nearby craters—Schomberger A, C2, and C1—may have deposited material with different properties, producing the fine‑scale layering.
Implications extend beyond lunar geology. The porosity and thermal conductivity of shallow soil influence whether water migrating into the subsurface is retained or lost through sublimation. "Every location can be unique. The amount of water retained could depend significantly on the shallow subsurface structure," the researchers said. Temperature profiles could also help engineers identify suitable depths for future habitats and equipment, as temperature variations a few centimetres below the surface may differ markedly from those at the top, potentially reducing the need for active thermal management.
For future lunar missions, the study offers an important ground‑truth reference against which scientists can assess other landing sites and provides constraints for modelling the Moon’s shallow subsurface, an area that has largely relied on laboratory studies and theoretical estimates to date.
Frequently asked questions
What are the three layers identified in the lunar soil?
A highly porous upper layer extending to about 3 cm, a middle layer between 3 and 6 cm with higher thermal conductivity, and a denser bottom layer between 6 and 10 cm with intermediate thermal conductivity.
What is the porosity and density of the uppermost layer?
The uppermost soil has an estimated porosity of about 80 % and a bulk density of around 600 kg m⁻³.
What temperature gradient was observed across the top 10 cm?
A temperature gradient of about 73 K across the top 10 cm at local noon was observed.